T-Tally is a light weight wired tally lights system without an integrated intercom.
The T-Tally’s red tally light indicates both the talent and camera man which camera is program (on-air) state and the green tally light indicates which camera is in preview state. This red/green light order can be changed in vMix if user so prefers. It’s also possible to disable one of the another.
T-Tally is ideal for small production houses that does not have huge budgets to spend on tally lights by other vendors. Our product is especially designed to work with video mixer software vMix 16 and newer versions. However T-Tally can also be used with any other software / system that can communicate through USB with Arduino/Genuino platform.
The T-Tally Main Unit allows up to 5 T-Tally Camera Units to be connected to it and now the Main Unit has it’s own tally light so it can be used as 6th tally! This 6th tally light could also be used as On Air -indicator (On Air -indicator not yet directly supported by vMix).
T-Tally Main Unit specs:
- Large box, quiet fanless design
- Black Main Unit Box size 19 x 11 x 6 cm
- Can be wall mounted
- PCB = Reliable operation
- Arduino/Genuino platform
- New: Arduino/Genuino is now on the Main Unit PCB and it is on a socket so it can be easily be replaced if needed!
- New: Onboard buzzer, on power on indicates that Arduino/Genuino is working correctly
- 1,7 m long USB cable included to connect the unit to the computer
- 5 x RJ45 connector for Camera Tally
- New: 1 x Tally Light on Main Unit
- Power On led
- 1 x DC female 2.1/5.5 mm Barrel Jack connector for additional powering
T-Tally Camera Unit specs:
- Updated: 5,5 x 3,5 x 2 cm small black box with a strap attachment.
- PCB = Reliable operation
- 1 shared Preview and Program LED on top
- 1 x Connectror for Main Unit
Each Tally Camera Unit can be attached to virtually any camera with a strap.
Standard package contains 1 Main Unit + 3 x T-Tally Camera Unit.
RJ-45 cables to connect Camera Units to the Main Unit are not included as these are widely available worldwide. You should use good quality “straight” cables with T-Tally.
Price of this set is 490 EUR + UPS/DHL shipping 39 EUR. VAT included for EU members.
Any additional duties, customs taxes etc are on customers responsibility.
Using external additional power is not required with T-Tally as it draws required power from the USB port. External power supply not included.
Software Requirements:
Preferred: vMix 22
or newer or any other system supporting Arduino/Genuino platform.
T-Tally product availibility:
Unknown
This project is owned and managed by:
Jan Tervo / JET Prod. / Kuvaus komeetta, Turku, Finland. Contact e-mail:
You can support this Tally System project by making a donation. Donations are highly appreciated. Thank you for your support!
T-Tally Copyright 2013-2016 JET Prod. / Kuvaus komeetta / JET, Turku / Finland. All Rights Reserved.